Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-96533 | CISC-RT-000180 | SV-105671r1_rule | Medium |
| Description |
|---|
| The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ICMP messages under a wide variety of conditions. Mask Reply ICMP messages are commonly used by attackers for network mapping and diagnosis. |
| STIG | Date |
|---|---|
| Cisco IOS Router RTR Security Technical Implementation Guide | 2020-06-30 |
Details
| Check Text ( C-95369r1_chk ) |
|---|
| Review the router configuration and verify that ip mask-reply command is not enabled on any external interfaces as shown in the example below. interface GigabitEthernet0/1 ip address x.x.x.x 255.255.255.0 ip mask-reply If the ip mask-reply command is configured on any external interface, this is a finding. |
| Fix Text (F-102209r1_fix) |
|---|
| Disable ip mask-reply on all external interfaces as shown below. R4(config)#int g0/1 R4(config-if)#no ip mask-reply |