The Cisco router must be configured to have all non-essential capabilities disabled.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-96515	CISC-RT-000070	SV-105653r1_rule		Low

Description

A compromised router introduces risk to the entire network infrastructure, as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of attacks by malicious users within the network. Preventing network breaches from within is dependent on implementing a comprehensive defense-in-depth strategy, including securing each device connected to the network. This is accomplished by following and implementing all security guidance applicable for each node type. A fundamental step in securing each router is to enable only the capabilities required for operation.

STIG	Date
Cisco IOS Router RTR Security Technical Implementation Guide	2019-07-25

Details

Check Text ( C-95351r1_chk )

Review the router configuration to verify that the router does not have any unnecessary or non-secure services enabled. For example, the following commands should not be in the configuration: boot network ip boot server ip bootp server ip dns server ip identd ip finger ip http server ip rcmd rcp-enable ip rcmd rsh-enable service config service finger service tcp-small-servers service udp-small-servers service pad If any unnecessary services are enabled, this is a finding.

Fix Text (F-102191r1_fix)

Disable the following services if enabled as shown in the example below. R2(config)#no boot network R2(config)#no ip boot server R2(config)#no ip bootp server R2(config)#no ip dns server R2(config)#no ip identd R2(config)#no ip finger R2(config)#no ip http server R2(config)#no ip rcmd rcp-enable R2(config)#no ip rcmd rsh-enable R2(config)#no service config R2(config)#no service finger R2(config)#no service tcp-small-servers R2(config)#no service udp-small-servers R2(config)#no service pad