UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The Cisco router must be configured to use encryption for routing protocol authentication.


Overview

Finding ID Version Rule ID IA Controls Severity
V-96509 CISC-RT-000040 SV-105647r1_rule Medium
Description
A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. However, using clear-text authentication provides little benefit since an attacker can intercept traffic and view the authentication key. This would allow the attacker to use the authentication key in an attack. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information; this includes all Interior Gateway Protocols (such as OSPF, EIGRP, and IS-IS) and Exterior Gateway Protocols (such as BGP), MPLS-related protocols (such as LDP), and multicast-related protocols.
STIG Date
Cisco IOS Router RTR Security Technical Implementation Guide 2019-07-25

Details

Check Text ( C-95345r1_chk )
Review the router configuration. For every routing protocol that affects the routing or forwarding tables, verify that neighbor router authentication is encrypting the authentication key as shown in the examples below.

BGP Example

router bgp nn
no synchronization
bgp log-neighbor-changes
neighbor x.x.x.x remote-as nn
neighbor x.x.x.x password xxxxxxx

Note: BGP authentication uses MD5

EIGRP Example

interface GigabitEthernet1/0
ip address x.x.x.x 255.255.255.0
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 EIGRP_KEY_CHAIN

IS-IS Example

interface GigabitEthernet1/0
ip address x.x.x.x 255.255.255.0
ip router isis
isis authentication mode md5
isis authentication key-chain ISIS_KEY_CHAIN

OSPF Example

interface GigabitEthernet1/0
ip address x.x.x.x 255.255.255.0
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 xxxxxx

RIP Example

interface GigabitEthernet1/0
ip rip authentication mode md5
ip rip authentication key-chain RIP_KEY_CHAIN

If the routing protocol is not encrypting the authentication key, this is a finding.
Fix Text (F-102185r1_fix)
Configure all routing protocol authentications to encrypt the authentication key.

BGP Example

R1(config)#router bgp nn
R1(config-router)#neighbor x.x.x.x password xxxxxx

EIGRP Example

R2(config)#int g0/1
R2(config-if)#ip authentication mode eigrp 1 md5
R2(config-if)#ip authentication key-chain eigrp 1 EIGRP_KEY_CHAIN

IS-IS Example

R5(config)#int g0/1
R5(config-if)#isis authentication mode md5
R5(config-if)#isis authentication key-chain ISIS_KEY_CHAIN

OSPF Example

R1(config)#int g1/0
R1(config-if)#ip ospf authentication message-digest
R1(config-if)#ip ospf message-digest-key 1 md5 xxxxxx

RIP Example

R2(config)#int g1/0
R2(config-if)#ip rip authentication mode md5
R2(config-if)#ip rip authentication key-chain RIP_KEY_CHAIN