Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Cisco router must automatically remove or disable temporary user accounts after 72 hours.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-96011 | CISC-ND-000070 | SV-105149r1_rule | Medium |
| Description |
|---|
| Temporary accounts are established as part of normal account activation procedures when there is a need for short-term accounts without the demand for immediacy in account activation. If temporary accounts remain active when no longer needed, they may be used to gain unauthorized access. The risk is greater for the network device since these accounts have elevated privileges. To mitigate this risk, automated termination of all temporary accounts must be set upon account creation. |
| STIG | Date |
|---|---|
| Cisco IOS Router NDM Security Technical Implementation Guide | 2019-12-19 |
Details
| Check Text ( C-94843r1_chk ) |
|---|
| The Cisco router is not compliant with this requirement. However, the risk associated with this requirement can be fully mitigated if the router is configured to utilize an authentication server to authenticate and authorize users for administrative access. Review the router configuration to verify that the device is configured to use an authentication server as primary source for authentication as shown in the following example: aaa new-model ! aaa authentication login LOGIN_AUTHENTICATION group radius local … … … ip http authentication aaa login-authentication LOGIN_AUTHENTICATION ip http secure-server … … … radius-server host x.x.x.x auth-port 1645 acct-port 1646 key xxxxxxx … … … line con 0 exec-timeout 10 0 login authentication LOGIN_AUTHENTICATION line vty 0 4 exec-timeout 10 0 login authentication LOGIN_AUTHENTICATION If the router is not configured to use an authentication server to authenticate and authorize users for administrative access, this is a finding. |
| Fix Text (F-101689r1_fix) |
|---|
| Step 1: Configure the Cisco router to use an authentication server as shown in the following example: R4(config)#radius host 10.1.48.2 key xxxxxx Step 2: Configure the authentication order to use the authentication server as primary source for authentication as shown in the following example: R4(config)#aaa authentication login LOGIN_AUTHENTICATION group radius local Step 3: Configure all network connections associated with a device management to use an authentication server for the purpose of login authentication. R4(config)#line vty 0 4 R4(config-line)#login authentication LOGIN_AUTHENTICATION R4(config-line)#exit R4(config)#line con 0 R4(config-line)#login authentication LOGIN_AUTHENTICATION R4(config-line)#exit R4(config)#ip http authentication aaa login-authentication LOGIN_AUTHENTICATION |