Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-96101 | CISC-ND-000840 | SV-105239r1_rule | Medium |
Description |
---|
Automatic session termination addresses the termination of administrator-initiated logical sessions in contrast to the termination of network connections that are associated with communications sessions (i.e., network disconnect). A logical session (for local, network, and remote access) is initiated whenever an administrator (or process acting on behalf of a user) accesses a network device. Such administrator sessions can be terminated (and thus terminate network administrator access) without terminating network sessions. Session termination terminates all processes associated with an administrator's logical session except those processes that are specifically created by the administrator (i.e., session owner) to continue after the session is terminated. Conditions or trigger events requiring automatic session termination can include, for example, organization-defined periods of user inactivity, targeted responses to certain types of incidents, and time-of-day restrictions on information system use. These conditions will vary across environments and network device types. |
STIG | Date |
---|---|
Cisco IOS Router NDM Security Technical Implementation Guide | 2019-07-24 |
Check Text ( C-94933r1_chk ) |
---|
Review the Cisco router configuration to verify that all network connections associated with a device management have an idle timeout value set to 10 minutes or less as shown in the following example: ip http secure-server ip http timeout-policy idle 600 life nnnn requests nn … … … line con 0 exec-timeout 10 0 line vty 0 4 exec-timeout 10 0 If the Cisco router is not configured to automatically terminate a network administrator session after organization-defined conditions or trigger events requiring session disconnect, this is a finding. |
Fix Text (F-101777r1_fix) |
---|
Set the idle timeout value network connections associated with a device management to 10 minutes or less as shown in the example below. R1(config)#line vty 0 4 R1(config-line)#exec-timeout 10 0 R1(config-line)#exit R1(config)#line con 0 R1(config-line)#exec-timeout 10 0 R1(config-line)#exit R2(config)#ip http timeout-policy idle 600 life nnnn requests nn |