The Cisco ASA must be configured to protect against known types of denial-of-service (DoS) attacks by enabling the Threat Detection feature.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-239932	CASA-ND-001180	SV-239932r961620_rule		Medium

Description
DoS is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity. This requirement addresses the configuration of network devices to mitigate the impact of DoS attacks that have occurred or are ongoing on device availability. For each network device, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or restricting the number of sessions the device opens at one time). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks. The security safeguards cannot be defined at the DoD level because they vary according to the capabilities of the individual network devices and the security controls applied on the adjacent networks (for example, firewalls performing packet filtering to block DoS attacks).

Description

DoS is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity. This requirement addresses the configuration of network devices to mitigate the impact of DoS attacks that have occurred or are ongoing on device availability. For each network device, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or restricting the number of sessions the device opens at one time). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks. The security safeguards cannot be defined at the DoD level because they vary according to the capabilities of the individual network devices and the security controls applied on the adjacent networks (for example, firewalls performing packet filtering to block DoS attacks).

STIG	Date
Cisco ASA NDM Security Technical Implementation Guide	2024-06-06

Details

Check Text ( C-43165r929025_chk )
Note: When operating the ASA in multi-context mode with a separate IDPS, threat detection cannot be enabled, and this check is Not Applicable. Review the ASA configuration and verify the Threat Detection feature is enabled as shown in the example below. threat-detection basic-threat If the Cisco ASA does not have the Threat Detection feature enabled, this is a finding.

Fix Text (F-43124r666158_fix)
Configure the Cisco ASA to protect against known types of DoS attacks by enabling the Threat Detection feature. ASA(config)# threat-detection basic-threat ASA(config)# end