The Cisco ASA must be configured to produce audit log records containing information to establish the source of events.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-239908	CASA-ND-000290	SV-239908r879566_rule		Medium

Description
In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know the source of the event. The source may be a component, module, or process within the device or an external session, administrator, or device. Associating information about where the source of the event occurred provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured device.

Description

In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know the source of the event. The source may be a component, module, or process within the device or an external session, administrator, or device. Associating information about where the source of the event occurred provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured device.

STIG	Date
Cisco ASA NDM Security Technical Implementation Guide	2023-05-02

Details

Check Text ( C-43141r666085_chk )
Review the Cisco ASA configuration to verify that it is compliant with this requirement. The configuration should look similar to the example below: logging enable logging buffered informational Note: The ASA will log location (IP address or console) from where configuration commands are entered. If the ASA is not configured to generate audit records containing information to establish the source of events, this is a finding.

Check Text ( C-43141r666085_chk )

Review the Cisco ASA configuration to verify that it is compliant with this requirement. The configuration should look similar to the example below:

logging enable
logging buffered informational

Note: The ASA will log location (IP address or console) from where configuration commands are entered.

If the ASA is not configured to generate audit records containing information to establish the source of events, this is a finding.

Fix Text (F-43100r666086_fix)
Configure the Cisco ASA as shown in the example below. ASA(config)# logging enable ASA(config)# logging buffered informational ASA(config)# end