UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The Cisco ASA must be configured to send log data to a central log server for the purpose of forwarding alerts to organization-defined personnel and/or the firewall administrator.


Overview

Finding ID Version Rule ID IA Controls Severity
V-239943 CASA-ND-001410 SV-239943r863234_rule High
Description
The aggregation of log data kept on a syslog server can be used to detect attacks and trigger an alert to the appropriate security personnel. The stored log data can used to detect weaknesses in security that enable the network IA team to find and address these weaknesses before breaches can occur. Reviewing these logs, whether before or after a security breach, are important in showing whether someone is an internal employee or an outside threat. The ISSM or ISSO may designate the firewall/system administrator or other authorized personnel to receive the alert within the specified time, validate the alert, and then forward only validated alerts to the ISSM and ISSO.
STIG Date
Cisco ASA NDM Security Technical Implementation Guide 2022-09-12

Details

Check Text ( C-43176r666190_chk )
Verify the ASA is configured to send logs to a syslog server. The configuration should look similar to the example below.

logging trap notifications
logging host NDM_INTERFACE 10.1.48.10 6/1514

Note: A logging list can be used as an alternative to the severity level.

If the ASA is not configured to send log data to the syslog server, this is a finding.
Fix Text (F-43135r666191_fix)
Configure the ASA to send log messages to the syslog server as shown in the example below.

ASA(config)# logging host NDM_INTERFACE 10.1.48.10 6/1514
ASA(config)# logging trap notifications
ASA(config)# end