The Cisco ASA must be configured to generate audit records showing starting and ending time for administrator access to the system.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-239937	CASA-ND-001240	SV-239937r666174_rule		Medium

Description
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter).

STIG	Date
Cisco ASA NDM Security Technical Implementation Guide	2022-09-12

Details

Check Text ( C-43170r666172_chk )

Review the Cisco ASA configuration to verify it is compliant with this requirement. The configuration should look similar to the example below. logging enable logging timestamp logging buffered informational Note: The ASA will log all login attempts as well as log the administrator’s name and time executing the enable command. The ASA will also log the time when the administrator logs out. If the Cisco ASA is not configured to generate log records showing starting and ending time for administrator access to the system, this is a finding.

Fix Text (F-43129r666173_fix)
Configure the ASA to log session start and ending per admin session as shown in the example below. ASA(config)# logging enable ASA(config)# logging timestamp ASA(config)# logging buffered informational ASA(config)# end