The Cisco ASA must be configured to produce audit records containing information to establish when (date and time) the events occurred.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-239906	CASA-ND-000270	SV-239906r666081_rule		Medium

Description
It is essential for security personnel to know what is being done, what was attempted, where it was done, when it was done, and by whom it was done in order to compile an accurate risk assessment. Logging the date and time of each detected event provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured network device. In order to establish and correlate the series of events leading up to an outage or attack, it is imperative the date and time are recorded in all log records.

Description

It is essential for security personnel to know what is being done, what was attempted, where it was done, when it was done, and by whom it was done in order to compile an accurate risk assessment. Logging the date and time of each detected event provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured network device. In order to establish and correlate the series of events leading up to an outage or attack, it is imperative the date and time are recorded in all log records.

STIG	Date
Cisco ASA NDM Security Technical Implementation Guide	2022-09-12

Details

Check Text ( C-43139r666079_chk )
Verify that the ASA is configured to include the date and time on all log records as shown in the configuration example below. logging timestamp If time stamp is not configured, this is a finding.

Fix Text (F-43098r666080_fix)
Configure the ASA to include the date and time on all log records as shown in the example below. ASA(config)# logging timestamp