DocAve must use TLS 1.2, at a minimum, to protect the confidentiality of sensitive data during electronic dissemination using remote access.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-253512	DCAV-00-000006	SV-253512r836511_rule		High

Description
Using older unauthorized versions or incorrectly configuring protocol negotiation makes the gateway vulnerable to known and unknown attacks that exploit vulnerabilities in this protocol. This requirement applies to Transport Layer Security (TLS) gateways (also known as Secure Sockets Layer [SSL] gateways), web servers, and web applications and is not applicable to virtual private network (VPN) devices. DocAve uses HTTPS and NetTcp protocols as the underlying security protocol and thus is in scope for this requirement.

Description

Using older unauthorized versions or incorrectly configuring protocol negotiation makes the gateway vulnerable to known and unknown attacks that exploit vulnerabilities in this protocol. This requirement applies to Transport Layer Security (TLS) gateways (also known as Secure Sockets Layer [SSL] gateways), web servers, and web applications and is not applicable to virtual private network (VPN) devices. DocAve uses HTTPS and NetTcp protocols as the underlying security protocol and thus is in scope for this requirement.

STIG	Date
AvePoint DocAve 6 Security Technical Implementation Guide	2022-08-24

Details

Check Text ( C-56964r836509_chk )
Check the .Net Framework version on DocAve servers. - On the servers where DocAve is installed, open Registry Editor. - Refer to the official Microsoft document to verify the .Net Framework version supports TLS 1.2. The official Microsoft Document URL is: https://docs.microsoft.com/en-us/mem/configmgr/core/plan-design/security/enable-tls-1-2-client#bkmk_net. - .NET Framework 4.6.2 or later supports TLS 1.2 inherently. If the .Net Framework version doesn't support TLS 1.2, this is a finding. Check that DocAve servers only have TLS 1.2 protocol enabled. - On the DocAve servers, open Registry Editor. - Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols. - Verify TLS 1.0, TLS 1.1, and any SSL protocols are not enabled. If TLS 1.0, TLS 1.1, or any SSL protocols are enabled, this is a finding. Check that DocAve servers have strong cryptography setting enabled. - On the DocAve servers, open Registry Editor. - Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319. - Verify "SystemDefaultTlsVersions" = dword:00000001 and "SchUseStrongCrypto" = dword:00000001, otherwise this is a finding.

Check Text ( C-56964r836509_chk )

Check the .Net Framework version on DocAve servers.
- On the servers where DocAve is installed, open Registry Editor.
- Refer to the official Microsoft document to verify the .Net Framework version supports TLS 1.2. The official Microsoft Document URL is: https://docs.microsoft.com/en-us/mem/configmgr/core/plan-design/security/enable-tls-1-2-client#bkmk_net.
- .NET Framework 4.6.2 or later supports TLS 1.2 inherently.

If the .Net Framework version doesn't support TLS 1.2, this is a finding.

Check that DocAve servers only have TLS 1.2 protocol enabled.
- On the DocAve servers, open Registry Editor.
- Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols.
- Verify TLS 1.0, TLS 1.1, and any SSL protocols are not enabled.

If TLS 1.0, TLS 1.1, or any SSL protocols are enabled, this is a finding.

Check that DocAve servers have strong cryptography setting enabled.
- On the DocAve servers, open Registry Editor.
- Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319.
- Verify "SystemDefaultTlsVersions" = dword:00000001 and "SchUseStrongCrypto" = dword:00000001, otherwise this is a finding.

Fix Text (F-56915r836510_fix)
Consult the Microsoft documentation and ensure the .Net Framework on DocAve servers uses a version that supports TLS 1.2. Update if necessary. Configure the DocAve servers to enable TLS 1.2 protocol only: - On the DocAve servers, open Registry Editor. - Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols. - Disable TLS 1.0, TLS 1.1, and any SSL protocols if present. Configure the DocAve servers to enable strong cryptography setting. - On the DocAve servers, open Registry Editor. - Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319 and verify: "SystemDefaultTlsVersions" = dword:00000001 "SchUseStrongCrypto" = dword:00000001

Fix Text (F-56915r836510_fix)

Consult the Microsoft documentation and ensure the .Net Framework on DocAve servers uses a version that supports TLS 1.2. Update if necessary.

Configure the DocAve servers to enable TLS 1.2 protocol only:
- On the DocAve servers, open Registry Editor.
- Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols.
- Disable TLS 1.0, TLS 1.1, and any SSL protocols if present.

Configure the DocAve servers to enable strong cryptography setting.
- On the DocAve servers, open Registry Editor.
- Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319 and verify:
"SystemDefaultTlsVersions" = dword:00000001
"SchUseStrongCrypto" = dword:00000001