Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-256045 | ARST-RT-000660 | SV-256045r882477_rule | Low |
Description |
---|
Real-time multicast traffic can entail multiple large flows of data. Large unicast flows tend to be fairly isolated (i.e., someone doing a file download here or there), whereas multicast can have broader impact on bandwidth consumption, resulting in extreme network congestion. Hence, it is imperative that there is multicast admission control to restrict which multicast groups hosts are allowed to join via IGMP or MLD. |
STIG | Date |
---|---|
Arista MLS EOS 4.2x Router Security Technical Implementation Guide | 2023-01-17 |
Check Text ( C-59721r882475_chk ) |
---|
Review the configuration of the Arista DR to verify it is filtering IGMP or MLD report messages, allowing hosts to join only groups that have been approved. Note: This requirement is only applicable to Source Specific Multicast (SSM) implementation. This requirement is not applicable to Any Source Multicast (ASM) because the filtering is being performed by the Rendezvous Point router. Step 1: Verify the ACL filters the unauthorized IGMP groups. The ACL below is blocking the IGMP group sourced 232.0.0.0/8. Execute the command "sh ip access-list". ip access-list FILTER_IGMP 10 deny igmp 232.0.0.0/8 any 20 permit ip any any Step 2: Verify the ACL is configured on internal host-facing interfaces (IGMP process) to filter IGMP. router igmp ip igmp access-group FILTER_IGMP or interface ethernet 3 ip access-group FILTER_IGMP If the Arista DR is not filtering IGMP or MLD report messages, this is a finding. |
Fix Text (F-59664r882476_fix) |
---|
Configure the Arista DR to filter the IGMP and MLD report messages to allow hosts to join only multicast groups that have been approved. Step 1: Configure the ACL to filter the unauthorized IGMP groups. LEAF-1A(config-if-Et3)#ip access-list FILTER_IGMP LEAF-1A(config-acl-FILTER_IGMP)# 10 deny igmp 232.0.0.0/8 any LEAF-1A(config-acl-FILTER_IGMP)# 20 permit ip any any Step 2: Configure the IGMP filter in IGMP process. LEAF-1A(config-acl-FILTER_IGMP)#router igmp LEAF-1A(config-router-igmp)# ip igmp access-group FILTER_IGMP or Configure the IGMP filter on internal host-facing interfaces (IGMP process) to filter IGMP. LEAF-1A(config-router-igmp)#interface ethernet 3 LEAF-1A(config-if-Et3)# ip access-group FILTER_IGMP in |