UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The Arista Multilayer Switch must not enable the RIP routing protocol.


Overview

Finding ID Version Rule ID IA Controls Severity
V-60933 AMLS-L3-000320 SV-75391r1_rule Medium
Description
A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or merely used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. However, using clear-text authentication provides little benefit since an attacker can intercept traffic and view the authentication key. This would allow the attacker to use the authentication key in an attack. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information; this includes all Interior Gateway Protocols (such as OSPF, EIGRP, and IS-IS) and Exterior Gateway Protocols (such as BGP), MPLS-related protocols (such as LDP), and Multicast-related protocols.
STIG Date
Arista MLS DCS-7000 Series RTR Security Technical Implementation Guide 2015-07-06

Details

Check Text ( C-61879r1_chk )
Review the router configuration to determine if RIP is enabled via the "show running-config" command. RIP is disabled by default on an Arista switch and is only enabled when explicitly configured. If a configuration statement enabling RIP is in the Arista Multilayer Switch configuration, this is a finding.
Fix Text (F-66645r1_fix)
Disable RIP via the "no router rip" command.