UCF STIG Viewer Logo

The Arista Multilayer Switch must display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device.


Overview

Finding ID Version Rule ID IA Controls Severity
V-60843 AMLS-NM-000160 SV-75299r1_rule Medium
Description
Display of the DoD-approved use notification before granting access to the network device ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. System use notifications are required only for access via logon interfaces with human users.
STIG Date
Arista MLS DCS-7000 Series NDM Security Technical Implementation Guide 2019-09-30

Details

Check Text ( C-61789r1_chk )
Review the device configuration and verify display of the Standard DoD Notice and Consent Banner.

If the banner is not displayed, this is a finding.

To verify the device is configured to display the DoD Banner, review the running configuration with the "show running-config" command. Identify the section "banner login" and verify the standard DoD Banner is displayed.
Fix Text (F-66553r1_fix)
Configure the switch to display the Standard DoD Notice and Consent banner.

To configure the banner, enter the following commands from the configuration mode interface. Replace the bracketed data with the DoD Banner.

switch(config)#banner login
[DoD Banner]
EOF