The Arista Multilayer Switch must generate audit records when successful/unsuccessful attempts to access privileges occur.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-60847	AMLS-NM-000180	SV-75303r1_rule		Low

Description
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).

STIG	Date
Arista MLS DCS-7000 Series NDM Security Technical Implementation Guide	2015-07-06

Details

Check Text ( C-61793r1_chk )
Review the switch configuration and verify that logging is enabled. If logging is not enabled or is not enabled with sufficient detail to fulfill the specifications set forth in the VulDiscussion, this is a finding. To determine if logging is enabled, enter: switch#show logging The output must show logging as enabled, with a logging level of informational or debugging. In order to ensure all user commands are captured, the following statement must be in the running config: aaa accounting commands all default start-stop logging [group radius]

Check Text ( C-61793r1_chk )

Review the switch configuration and verify that logging is enabled.

If logging is not enabled or is not enabled with sufficient detail to fulfill the specifications set forth in the VulDiscussion, this is a finding.

To determine if logging is enabled, enter:

switch#show logging

The output must show logging as enabled, with a logging level of informational or debugging.

In order to ensure all user commands are captured, the following statement must be in the running config:

aaa accounting commands all default start-stop logging [group radius]

Fix Text (F-66557r1_fix)
Enable logging on the switch with sufficient detail to fulfill the specifications set forth in the VulDiscussion. To configure logging to a remote syslog server at the informational level, enter: switch#config switch(config)#logging host [ip address] switch(config)#logging trap informational Then configure the following AAA: aaa accounting commands all default start-stop logging [group radius]

Fix Text (F-66557r1_fix)

Enable logging on the switch with sufficient detail to fulfill the specifications set forth in the VulDiscussion.

To configure logging to a remote syslog server at the informational level, enter:

switch#config
switch(config)#logging host [ip address]
switch(config)#logging trap informational

Then configure the following AAA:

aaa accounting commands all default start-stop logging [group radius]